CR 027 Semiconductor Fan Heater

1.Compact heater 2.Heating capacity adjusts to ambient temperature 3.Adjustable temperature range 4Temperature safety cut-out

Semiconductor fan heaters prevent the formation of condensation and ensure an even temperature in switch and control equipment. The built-in regulator is used to set the desired temperature.

 

Heating element	PTC resistor, temperature limiting
Temperature safety cut-out	to protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearing	Airflow see table
	service life 50,000h at 25°C (77°F)
Connection	2-pole clamp 2.5mm², clamping torque 0.8Nm max
Casing	plastic according to UL94 V-0, light grey
Optical indicator	thermostat control lamp
Connection	2-pole clamp 2.5mm², clamping torque 0.8Nm max.
Mounting	clip for 35mm DIN rail, EN 60715
Fitting position	vertical airflow (air outlet up) other fitting positions possible
Dimensions	100 x 128 x 165mm
Operating/Storage temperature	-45 to +70°C (-49 to +158°F)
Operating / Storage humidity	max. 90 % RH (non-condensing)
Protection type/Protection class	IP20 / II (double insulated)
Approvals	UL File No. E204590
Art. No.	Operating voltage	Heating capacity (50Hz)*	Heating capacity (60Hz)*	Inrush current max.	Pre-fuse T (time-delay)	Airflow, free flow	Setting range Temperature regulator	Weight (approx.)
02700.0-00	220-240VAC, 50/60Hz	475W	550W	11.0A	6.3A	35m³/h	0 to +60°C	0.9kg
02701.0-00	220-240VAC, 50/60Hz	550W	650W	13.0A	8A	45m³/h	0 to +60°C	1.1kg
02700.9-00	100-120VAC, 50/60Hz	400W	550W	14.0A	8A	35m³/h	+32 to +140°F	0.9kg
02701.9-00	100-120VAC, 50/60Hz	510W	650W	15.0A	8A	45m³/h	+32 to +140°F	1.1kg
*at 20°C (68°F) ambient temperature

Technical drawing

CR 027 Semiconductor Fan Heater